|
CALIBRATION OF MEASURING EQUIPMENT |
| Measuring
unit |
Measuring
range |
Type
of measuring means |
|
Length
|
0,5 - 500 mm |
- Planparalell gage
blocks
- Subito, dial indicator, pasometre
- Micrometer for external and internal measuring
- Vernier caliper, depth gage, height gage
- Plug gage and ring gage (smooth and thread)
|
| Angle |
0 - 360° |
- Bevel protactor, square, level,
V-block
|
| Pressure |
1-1200 bar |
- Manometre
|
| MATERIAL
TESTING |
Mechanical
metallographic testing |
- Mechanical testing of metal on
elongation, pressing and bending
- "Brinel",
"Vikers" and "Rokvel" hardness testing
- Mechanical testing of metal-impact testing using "Charpy"method
- Metallographic testing-micro and macro testing
- Testing of steel hardening - "Jominy" method
- Testing of depth and microhardness of nitriding and case
hardening
surfaces
|
Chemical
and chemical-
physical testing |
- Testing of chemical
compozition for steel and non-ferrous metals
- Testing of physical-chemical properties of paints and thinners
- Physical-chemical testing of fuel and lubricant |
